Philadelphia Water Heater Maintenance in 10 Minutes

Posted by on Feb 25, 2014 in Water Heater Repair Philadelphia | 0 comments

We are going to put you to work today, but just for about 10 minutes. Yep, that’s all it will consider these 2 essential water heater upkeep tasks; however, Water Heater Repair Philadelphia¬†understands they will do an outstanding task of helping with 3 things:
Having your water heater last as long as possible (that will conserve you cash).
Making sure the water heater runs safely (we do not want it to blow up).
Having it run as energy efficiently as possible (likewise conserving you cash).

So with that in mind, are you ready to invest 10 minutes once or twice a year to help conserve some money? Water Heater Repair Philadelphia PA thought so.

Testing the T&P Relief Valve

Typically called the T&P Valve, or the temperature and pressure relief valve, has a vital job. It helps ensure excess pressure does not develop inside the water storage tank, or in much more basic terms, it sees to it the water heater does not blow up. As the picture shows, it has a lever or little manage on it. All you have to do is raise it part means and then let go of it. Ideally, it snapped back to its shut position quickly. If it is working correctly, a little water can be heard entering into the drain pipe below the lever you just lifted and you possibly heard some pressure being released. If none of these things have actually happened throughout the test, the valve will need to be replaced.

Do a Mimi Water Heater Tank Flush

By nature, rust and rust will happen inside the water storage tank thanks to the chemical reactions taking place with all the components inside that are required to warm the water. We will not get too technical right here, but it is easy to assist avoid this process by doing a flush or draining of all or a portion of the water in the tank.

For just a mini flush, position a bucket under the drain valve below the tank. Open the drain valve and fill up the bucket with water. Drain a minimum of a few gallons of water in total. Let the water sit in the pail for a few minutes to settle and analyze if there is much that settles to the bottom of the bucket. If there is, if the water heater has actually not been drained for a long period of time (or ever), it would be best to do a full flush of the tank to get as much of the sediment out as possible. You will wish to turn the temperature dial down and might want to let the water cool off for about an hour initially so it is not too hot while draining it. Also, it would be simpler to attach a hose to the drain valve and let the water go outside instead of utilizing buckets.

If the water looks reasonably clean and clear from the tiny test you should be all set. When the water heater has a large quantity of sediment inside of it, it can make loud popping noises and it cuts down on its effectiveness too.

Though water heaters are fairly maintenance free and not hard to run, whenever you feel the slightest uneasy or are not sure of what to do, it is always best to have a plumbing professional assist with the circumstance.

Water Heater Repair Philadelphia